USB-PC SCOPE + GENERATOR (2CH.)

PCSGU250

A complete USB-powered lab-in-a-box

More details

All prices include VAT of 24%

Feature-packed PcLab2000-LT software for two channel oscilloscope, spectrum analyser, recorder, function generator and bode plotter. With the generator, you can create your own waveforms using the integrated signal wave editor. For automated measurements, it is even possible to generate wave sequences, using file or computer RS232 input.

Features

Function generator:

  • Crystal-based stability
  • Standard waveforms: sine, square and triangle
  • Predefined library waveforms included: sine(x)/x, DCV, sweep, ...

Oscilloscope:

  • Auto set-up function and X10 option
  • Pre-trigger function
  • Readouts: True RMS, dBV, dBm, p to p, Duty cycle, Frequency…

Transient recorder:

  • Automatic storage of data
  • Automatic recording for more than 1 year
  • Record and display of screens

Bode Plotter:

  • Automated sync between oscilloscope and generator
  • Logatithmic scale option
  • Volt or dB display scale
  • Phase plot option

Spectrum analyser:

  • Linear or logarithmic timescale
  • Operating principle: FFT (Fast Fourier Transform)
  • FFT input channel: CH1 or CH2
  • Zoom function

In the box:

  • Getting started manual
  • USB PC Scope+generator unit
  • USB cable
  • Software on CD
  • 1 x 60MHz scope probe (PROBE60S)
  • BNC adapter, BNC male to RCA female (CBNC15)

Specifications

General:

  • Markers for: amplitude/voltage and frequency/time
  • Input coupling: DC, AC and GND
  • Supply from USB port (500mA)
  • Dimensions: 205 x 55 X 175 / 8.2 x 2.2 x 7"

Function generator:

  • Amplitude range: 100mVpp to 10Vpp @ 1KHz// 600ohm load / 0V offset
  • Offset: from 0 to -5V or +5V max. (resolution 0.4% of full scale)
  • Vertical resolution: 8 bits
  • Square wave rise/fall time: 0.2µs
  • Sample rate: 12.5MHz
  • Typical sine wave distortion (THD): < 1%
  • Output impedance: 50ohm
  • Frequency range: from 0.005Hz to 500kHz

Oscilloscope:

  • Bandwidth: two channels DC to 12 MHz ±3dB
  • Input impedance: 1 Mohm / 30pF
  • Maximum input voltage: 30V (AC + DC)
  • Time base: 0.1µs to 500ms per division
  • Input range: 10mV to 3V/division
  • Input sensitivity: 0.3mV display resolution
  • Record length: 4K samples / channel
  • Sampling frequency: 250Hz to 25MHz

Transient recorder:

  • Timescale: 20ms/Div to 2000s/Div
  • Max record time: 9.4hour/screen
  • Max. number of samples: 100/s
  • Min. number of samples: 1 sample/20s

Bode Plotter:

  • voltage range: 10mV, 30mV, 0.1V, 0.3V, 1V, 3V
  • frequency range: 1kHz , 10kHz, 100kHz, 500kHz
  • Frequncy start: 10Hz, 100Hz, 1kHz, 10kHz

spectrum analyser:

  • Frequency range: 0 .. 120Hz to 12MHz
  • FFT resolution: 2048 lines

Minimum system requirements:

  • IBM compatible PC
  • Windows™ 2000, XP, Vista *
  • SVGA display card (min.1024 x 768)
  • Mouse
  • Free USB port 1.1 or 2.0
  • CD Rom player

Extras

(*) Windows™ is a registered trademarks of Microsoft Corporation

 

Write a review

USB-PC SCOPE + GENERATOR (2CH.)

USB-PC SCOPE + GENERATOR (2CH.)

A complete USB-powered lab-in-a-box

7 other products in the same category