PC interface card with parallel connection

More details

170,01 €

All prices include VAT of 24%

Connection to the computer is galvanically isolated, so that damage to the computer from the card is not possible. The card is controlled in a simple way using Turbo Pascal, QBasic, Visual Basic, Delphi, C++ (to use with MS-DOS, Win3.11, Win95, 98, ME, NT, XP, 2000). These procedures are pre-programmed and are provided along with a number of test and example programs on the disk supplied. The card itself has 16 galvanically isolated digital connections, which can be freely chosen as either inputs or outputs (eg. 6 inputs and 10 outputs) according to how they are set up by the user. Furthermore, the card has 9 analogue outputs, of which one is high precision, and 4 analogue inputs. If this capacity is not sufficient for a particular application then up to 4 cards can be connected together (1 master and 3 slaves), such that an enormous potential exists. The card can be used with many of our other Velleman kits such as: K6714 16 channel relay card, K8023 10-channel 2-wire remote control.


  • Galvanically isolated from computer
  • 16 galvanically isolated digital connections
  • 9 analogue outputs, of which one is high precision and 4 analogue inputs
  • A simple way of controlling using Turbo Pascal, Turbo C, Qbasic, Visual Basic
  • Printer bypass connector on board
  • Simple connection with printer port
  • *** FOR USB INTERFACE SEE K8055 AND K8061 ***.


Digital outputs:
  • optocoupler, open collector output: 50mA - max. 30VDC
Digital inputs:
  • optocoupler input: 5V/5mA, max. 20V/40mA
Analogue outputs :
  • 8 outputs DAC1 to DAC8, resolution: 64 steps
  • Minimum output voltage: 0.1V at 2mA
  • Maximum output voltage: 11.5V adjustable at 2mA
  • Resolution per step from 0.1 to 11.5V: 160mV +/- 90mV
  • 1 precision output DA1, resolution: 256 steps
  • Minimum output voltage: 0V
  • Maximum output voltage: 4.5V adjustable at 0.5mA
  • Resolution per step from 0 to 4.5V: 17.5mV
Analogue inputs:
  • Communication protocol: I²Cbus:
  • 4 analogue inputs AD1 to AD4, resolution: 256 steps
  • Minimum input voltage: 0V
  • Maximum input voltage: 5V
  • Input impedance: 50Mohm
  • Resolution: 19.5mV
  • LED indication for each I/O
  • 25 pin D series connector for computer
  • 25 pin D series connector for printer
  • supply voltage: 230Vac
  • PCB dimensions: 237 x 133mm (9.3" x 5.2")



Write a review



PC interface card with parallel connection

14 other products in the same category